BDNHX - TT-T-291E THINNER

Product Identification

Product ID:TT-T-291E THINNER
MSDS Date:01/01/1987
FSC:8010
NIIN:00-246-6112
MSDS Number: BDNHX

Responsible Party
ATLAS PAINT & VARNISH CO

Emergency Phone: 201-373-3300

Cage: KO008

Contractor
ATLAS PAINT AND VARNISH CO

Cage: 84239

Ingredients

SOLVENTS (TYPE NOT SPECIFIED)

Fraction By Weight: 100%.

Hazards

Effects of Overexposure:ANESTHESIA - HEADACHE,NAUSEA,DIZZINESS,ETC.
LIQUID MILDLY TO MODERATELY IRRITATING TO SKIN & EYES.

First Aid

First Aid:REMOVE VICTIM & RESTORE BREATHING IF REQUIRED, IF OVERCOME BY
VAPOR. SKIN: REMOVE W/SOAP & WATER. EYES: IMMEDIATELY FLUSH W/WATER
FOR AT LEAST 15 MINUTES.

Fire Fighting

Flash Point:112F TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:EXCLUDE AIR - USE FOAM,CO*2,STEAM,WATER-FOG,DRY
CHEMICALS
Fire Fighting Procedures:DO NOT USE WATER, EXCLUDE AIR - CONSULT FIRE
MARSHALL
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE W/AIR
BETWEEN UPPER & LOWER EXPLOSION LIMITS

Accidental Release

Spill Release Procedures:AVOID OPEN FLAME OR IGNTN SOURCES. PROVIDE
ADEQUATE VENTILATION.

Handling

Handling and Storage Precautions:AVOID OPEN FLAMES & SPARK SOURCES.
AVOID SPLASH-FILLING. PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE
HEAT.
Other Precautions:READ LABEL REGARDING TOXICITY & APPLICATION. DOT
CLASSIFICATION: FLAMMABLE

Exposure Controls

Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK - NIOSH
APPROVED
Ventilation:LOCAL-DESIRABLE. MECH-CLASS D EXPLSN-PROOF MOTORS &
SWITCHES
Protective Gloves:NOT NORM REQ
Eye Protection:YES-GUARD AGNST SPLASH
Other Protective Equipment:NONE
Supplemental Safety and Health
SPECIFIC GRAVITY GIVEN AT 60F. VAPOR PRESSURE @ 100F: 1.5 MM HG. MFG
LISTS TLV OF 200 PPM.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:319 TO 388F
Vapor Density:4.8
Spec Gravity:0.780
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT COLORED LIQUID WITH HYDROCARBON ODOR

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2

Disposal

Waste Disposal Methods:EVAPORATE OR FLUSH W/WATER TO AN OPEN,
WELL-VENTILATED AREA. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.